Simplify the construction process. As the milling and planing work of the cold regeneration device, the old pavement materials are milled, and the waste materials used in milling and planing are directly mixed and diffused in the mixing chamber. The construction process is simplified.

防止因道路施工而引起交通的堵塞。由于冷再生機在施工過程中省去了運輸和攪拌過程，施工現場投資相對較小。

Prevent traffic jams caused by road construction. Since the cold regenerator saves the transportation and mixing process in the construction process, the investment on the construction site is relatively small.

這有效地減少了由于道路建設造成的交通負荷。由于冷回?zé)崞魇窃谑┕?cè)施工的側馬路，所以可以選擇一半的施工，一半的道路維修，使道路可以修復，而不影響正常使用的交通。

This effectively reduces the traffic load caused by road construction. Since the cold regenerator is a side road constructed on the construction side, half of the construction and half of the road maintenance can be selected, so that the road can be repaired without affecting the traffic in normal use.

施工效率高。傳統的路面施工工藝是先用銑刨機將廢舊路面銑掉，然后將廢料輸送到攪拌站并混合。然后，將其運回施工現場并用攤鋪機鋪開，輥?zhàn)佑奢佔泳砥鸩⑿纬伞６植坷浠責崞髟谑┕み^程中屬于一種成型（也就是銑刨拌合攤鋪在冷再生機一次通過需要修復的馬路后先后完成），它可以隨著施工進度的進行而打開道路竣工。它可以大大縮短維護路面和提前開放交通所需的時間。

High construction efficiency. The traditional pavement construction process is to mill the waste pavement with a milling machine, and then transport the waste to the mixing plant and mix it. Then, it is transported back to the construction site and spread with a paver, and the roller is rolled up and formed by the roller. The local cooling regenerator belongs to a kind of molding in the construction process (that is, milling, mixing and paving are completed successively after the cold regenerator passes through the road to be repaired at one time). It can open the road for completion with the construction progress. It can greatly shorten the time required to maintain the pavement and open the traffic in advance.

保護環境，節約能源和資源。

Protect the environment and save energy and resources.

由于冷再生機銑刨后，幾乎所有的廢料都可以直接送入拌合腔攪拌就地?cái)備伬?，減少了新石料等材料的開采，不需要考慮運輸和堆垛的問題。廢棄材料。大大節約了資源，保護了環境。

After milling by the cold recycling machine, almost all wastes can be directly sent to the mixing chamber for mixing and paving on the ground, which reduces the mining of new stone and other materials and does not need to consider the problems of transportation and stacking. Waste materials. It greatly saves resources and protects the environment.

冷再生機不需要在工作中加熱和混合材料，節省了大量的能源。冷再生機是一種用來回收舊的廢棄道路材料的設備。沒有污染，所以我們稱之為綠色建筑技術。降低施工成本。與傳統的施工方法相比，冷再生機省去了許多設備人員材料等，相對成本較低。

The cold regenerator does not need to heat and mix materials in operation, which saves a lot of energy. Cold recycling machine is a kind of equipment used to recycle old waste road materials. There is no pollution, so we call it green building technology. Reduce construction costs. Compared with the traditional construction method, the cold regenerator saves many equipment, personnel and materials, and the relative cost is low.

以上的精彩內容就是小編今天為您提供的內容，更多的精彩內容來自：冷再生機租賃詳情請點擊我們的網站關注：http://ebagshop.com.cn

The above wonderful content is what Xiaobian provides for you today. More wonderful content comes from: cold regenerator rental. For details, please click our website to pay attention to: http://ebagshop.com.cn