大家常常會看到馬路邊建筑工人工程施工修路，修路先封道，修路歷程時會使用一些的科學技術生產工藝，主要包括混凝土冷再生和瀝清冷再生，今天冷再生機租賃廠家來講講冷再生機針對水泥和瀝青施工工藝的區別。

It is often seen that the construction workers at the roadside build roads for engineering construction. The roads are closed before they are built. During the road construction process, some advanced scientific and technological production processes will be used, mainly including concrete cold recycling and asphalt cold recycling. Today, the cold recycling machine rental manufacturers talk about the differences between the cement and asphalt construction processes.

1.水泥冷再生

1. Cold recycling of cement

混凝土冷再生靈活運用廢棄原材料，并按占比添加一定量的添加劑在自然環境溫度下就地持續地完成原材料的銑刨、粉碎、拌和、路面施工及夯實成形，進而修建出具備需要特性品質的新基層。

The cold recycling of concrete shall flexibly use the waste raw materials, and add a certain amount of additives according to the proportion to continuously complete the milling, crushing, mixing, pavement construction and compaction of the raw materials at the natural ambient temperature, so as to build a new base with the required characteristics and quality.

與傳統式工程施工方式對比，混凝土冷再生低成本、高的效率、性價比高，可降低環境污染。

Compared with traditional construction methods, concrete cold recycling has low cost, high efficiency and high cost performance, which can reduce environmental pollution.

2.瀝清冷再生

2. Leaching cold regeneration

瀝青道路冷再生將舊路銑刨、脫離所得的回收瀝青道路原材料，經粉碎篩分，抽提測量油石比、礦料級配構成及回收瀝清的性能參數后，按新的瀝清再造混和料配合比設計，適度添加一部分新骨料、水、乳化瀝青等，在常溫下標準下（不加熱）拌和新的瀝青道路原材料。冷再生技術性能夠降低成本10-20%左右，且生產率高。

Cold regeneration of asphalt road: the recycled asphalt road raw materials obtained from the milling and separation of the old road are crushed and screened, extracted and measured the asphalt stone ratio, mineral aggregate gradation composition and the performance parameters of the recycled asphalt, and then designed according to the new asphalt reconstruction mixture mix proportion. A part of new bone material, water, emulsified asphalt, etc. are added appropriately, and the new asphalt road raw materials are mixed under normal temperature (without heating). The cold regeneration technology can reduce the cost by 10-20% and has high productivity.

瀝清冷再生技術性推動了工業生產廢棄物的開發利用與再生能源的綜合利用，同時推動了原材料再造和能源取代等新技術應用、新技術新工藝的開發設計與科學研究。瀝青道路冷再生技術性的運用對維護綠色生態、綠色可持續性發展趨勢的環境效益更顯，對改進道路生態具備關鍵作用。

The technology of asphalt refrigeration regeneration has promoted the development and utilization of industrial production wastes and the comprehensive utilization of renewable energy, as well as the application of new technologies such as raw material recycling and energy replacement, and the development, design and scientific research of new technologies and processes. The application of cold recycling technology of asphalt roads has more obvious environmental benefits for maintaining green ecology and green sustainable development trend, and plays a key role in improving road ecological and environmental protection.

以上就是問題“冷再生機針對水泥和瀝青施工工藝的區別”的相關解答了，您對此有怎樣的想法或者需求，可以隨時來我們網站http://ebagshop.com.cn進行了解！

The above is the relevant answer to the question "The difference between cement and asphalt construction process of cold recycling machine". You can come to our website at any time for your ideas or needs http://ebagshop.com.cn Get to know!